Wednesday, August 31, 2011

Shag Pillow

Shag Pillow by b-a-boop
Shag Pillow, a photo by b-a-boop on Flickr.

Another handmade and upcycled present I recently made. I was inspired by a photo in a book of a denim rug I saw that was similar.

I began with two 14" squares for the front & back of the pillow, cut from a purple tee shirt.

I then cut 12" wide strips from some fleece remnants left over from a top made decades ago. I cut as many as possible from the odd shaped leftovers I had.

I roughly accordion folded the longest strip forming approximately 1" loops to estimate how wide it would end up and didn't think I had enough to cover the whole front. I then cut additional 12" strips from the purple tee shirt.

I started by centering the longest pink strip on one 14" square, leaving 1" of the purple hanging out on each side for the pillow seams. I then sewed a straight seam down the middle.

I folded over a 1" loop and sewed another seam about 1/4" from the first one. I repeated this until I didn't have enough fabric left for another loop.
Since it was knit fabric and going to be stuffed as a pillow, I just eyeballed the loops & seams, some were a bit crooked. If you wanted more precision you could measure & mark each fold & seam.

I then repeated looping the pink on the other half. I trimmed off the remainder of pink strip 1/4" away from the last seam.

I then overlapped a purple strip on top of the pink 1/2" and sewed over the same seam 1/4" from it's edge. Then I continued looping the purple in the same manner. After a few inches of purple loops, I trimmed it off and started another row of pink. As I was working with remnants, some small strips only made a few loops, so I patched pieces together as I had where the pink & purple meet.

I stopped the last loop about 1" from the edge and sewed the strip down to the square with a second seam to keep it from sticking out when sewing the pillow closed.
I thought it would be easier to leave it just with the loops before making it shaggy when sewing the pillow closed. I then placed the other 14" square face down on the loops and sewed the 1" seam around 3 sides of the pillow, sewing as close too the edges of the loops as possible.

I turned it right side out, stuffed in my pillow form & hand sewed the last edge closed.

Then it was time to make the shagging. I just took my scissors and cut the loops approximately every 1/2" (again just eyeballing it) and being careful not to cut completely down to the seams or to slice the base fabric.

And wallah! a cute shaggy pillow out of recycled materials.

3 comments:

LinkWithin

Related Posts Plugin for WordPress, Blogger...